My cart 0 produit
My account Registration / Login

Already have an account ?

Forgot your password ?

No account?

Registration

Secabo TC SMART heat press setting and configuration

All videos

The following eight menu items are available in the setting tier:

 

1. Auto Prepress

a. Enable / Disable a permanent pre-pressing.

 

2. Bluetooth

a. Enable / Disable Bluetooth.

 

3. Bluetooth PIN

a. You can use the rotary knob to save your individual PIN, which the app will then prompt you to enter. The default PIN from factory is 255, which is automatically recognized and used by the app.

 

4. Warning signal

a. Enable / Disable the warning signal before opening the press.

 

5. Sleep Mode

a. Setting the time interval in minutes, after which the press enters the Sleep Mode.

b. In addition, the temperature the press should be cooled down to when in Sleep Mode can also be set.

c. To completely disable Sleep Mode, set the time value to "0".

d. The active Sleep Mode can be exited at any time by pressing any button or by actuating the press lever. The press will then restore the previously set parameters.

 

6. Auto Off

a. Setting the time interval in minutes, after which the press completely turns off the heating.

b. To completely disable Auto Off Mode, set the time value to "0".

c. The active Auto Off Mode can be exited at any time by pressing any button or by actuating the press lever. The press will then restore the previously set parameters.

 

7. Language

a. Setting the menu language.

 

8. Unit

a. Configuring the temperature unit. Celsius or Fahrenheit are possible.

 

 

 

Setting the temperature: 

 

Briefly press the "Temperature" button, the symbol in the display starts flashing. The value in the display changes from the current actual value to the target value, which can now be set. Turn clockwise to increase the target temperature, counterclockwise to decrease. 

 

Press the rotary knob or press the "Temperature" button to store the set value. If no input occurs for 5 seconds, input mode ends automatically. Pressing the "Return" button exits input mode, the set value is not applied and the display returns to the current actual value. 

 

 

 

Setting the time: 

Briefly press the "Time" button, the symbol in the display flashes. Turning the rotary knob clockwise increases time, counter-clockwise decreases. Press the rotary knob or pressthe "Time" button to store value. If no input occurs for 5 seconds, input mode ends automatically. Pressing the "Return" button will exit the input mode, the display will return to its original value. 

 

 

 

Configuring pre-pressing: 

 

Briefly pressing the "Pre-pressing" button activates pre-pressing for the following press operation using the preset time, and is deactivated again upon completing the press operation. When activated, the Time+Pre symbol will light up in the lower part of the display with the corresponding time indicator. This will count down to 0 while pressing, whereupon the symbol and time switched off again. 

 

Holding the "Pre-pressing" button activates the setting mode for the PRE time analog with time setting: Symbol in the display flashes. Turning the rotary knob clockwise increases time, counter-clockwise decreases. Press the rotary knob or press the "Pre-pressing" button to store value. If no input occurs for 10s, input mode ends automatically. Pressing the "Return" button will exit the input mode, the display will return to its original value. 

 

Pre-pressing can be activated permanently from the settings menu.

 

 

 

Pressure :

 

Turn the hand wheel on top of the heating plate clockwise to increase the pressure, counterclockwise to decrease.